Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 ...

High performance magnetocaloric materials are crucial to realize the energy efficient and environment friendly magnetic cooling/refrigeration technology. We have designed Mn1-xCuxCoGe compounds possessing a giant magnetocaloric ...

The properties of the mixed system LiBH4–LiCl–P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 60 °C, accompanied with increased Li+ conductivity ...

As traditional silicon technology is moving fast towards its fundamental limits, all-oxide electronics is emerging as a challenger offering principally different electronic behavior and switching mechanisms. This technology ...

In this work we benefited from recent advances in tools for crystal‐structure analysis that enabled us to describe an exotic nanoscale phenomenon in structural chemistry. The Mn0.60Ni0.40As sample of the Mn1−xNixAs solid ...

Hydrogen is essential in a variety of large-scale chemical processes. As a carbon-free energy carrier, hydrogen has a potential for wide use within power production and transportation. However, most of the recent production ...

Alkali metal containing materials have become increasingly attractive in a world hunting for sustainable energy materials and green functional devices. Lithium- and sodium battery technology, lead-free piezo- and ferroelectric ...

Thin films of the catalytically interesting ternary and quaternary perovskites GdCoO3 and Gd0.9Ca0.1CoO3 are fabricated by atomic layer deposition using metal β-diketonates and ozone as precursors. The resulting thin films ...

The current study extends the insight into solid-state diffusion in alloys of the Platinum Group Metals (PGMs). Thereby, we pave the way for tailor making surface compositions of binary platinum (Pt) – rhodium (Rh) model ...

Nickelates, just like their isoelectronic cousins (the cuprate superconductors), are candidates for high temperature superconductivity. As charge density waves (CDW) and superconductivity might share a similar microscopic ...

Potassium sodium niobate (KNN) has long been considered a viable candidate for replacing lead‐based materials in piezo‐ and ferroelectric devices. The introduction of KNN on an industrial scale is highly awaited; however, ...

The sorbent enhanced water-gas shift (SEWGS) process has great potential for CO2 capture and is thereby a realistic alternative to conventional post-combustion capture by gas emission scrubbing. Nevertheless, better ...

In recent years, the scientific community has shown an increasing interest in regards to the investigation of novel materials for the intercalation of lithium atoms, suitable for application as cathodes in the new generations ...

The authors here report epitaxial growth of the ferrimagnet NixFe3–xO4 (NFO) by atomic layer deposition at low temperatures. Films grow epitaxially at a reactor temperature of 250 °C and require no further postannealing ...

Several studies have demonstrated that MgH2 is a promising conversion-type anode toward Li. A major obstacle is the reversible capacity during cycling. Electrochemical co-existence of a mixed metal hydride-oxide conversion ...

Transition metal containing polyanion compounds are effective excellent electrode materials for sodium-ion batteries due to their high intrinsic electrochemical potentials and to the resulting high energy density. Iron ...

Thin film of silicon is an interesting material for many technological applications in electronic industry and in energy harvesting technologies, but requires a method for controlled growth of thin films. The purpose of ...

In the past few decades, advances in colloidal nanoparticle synthesis have created new possibilities for the preparation of supported model catalysts. However, effective removal of surfactants is a prerequisite to evaluate ...

Pre-combustion CO2 capture technologies are becoming viable alternatives to more conventional post-combustion capture by gas emissions scrubbing. The sorbent enhanced water-gas shift (SEWGS) process is a promising future ...

We demonstrate controlled deposition by atomic layer deposition of YVO4:Yb3+ thin films exhibiting an intense NIR emission under UV excitation after post-deposition annealing at 1000 °C. The samples are deposited using the ...

We have studied the structural behavior of SAPO-37 during calcination using simultaneous in situ powder X-ray diffraction (PXRD) and mass spectroscopy (MS) in addition to ex situ thermogravimetric analysis (TGA) and ...

UV to visible and near-infrared converting thin films of YbVO4 have been deposited by atomic layer deposition, using the precursor combinations Yb(thd)3 (thd = 2,2,6,6-tetramethyl-3,5-heptanedione) and O3, and VO(thd)2 and ...

Li2FeSiO4 is an important alternative cathode for next generation Li-ion batteries due to its high theoretical capacity (330 mA h g−1). However, its development has faced significant challenges arising from structural ...

Sodium orthosilicates Na2MSiO4 (M = Mn, Fe, Co and Ni) have attracted much attention due to the possibility of exchanging two electrons per formula unit. They are also found to exhibit great structural stability due to a ...

In the present contribution we assess the luminescent properties of amorphous europium titanium phosphate thin films. The films have been deposited by atomic layer deposition, using the precursor combinations Eu(thd)3 (thd ...

Thin films of complex alkali oxides are frequently investigated due to the large range of electric effects that are found in this class of materials. Their piezo- and ferroelectric properties also place them as sustainable ...

The Ruddlesden–Popper (RP3) type oxides, La4Co3O10+δ and La4Ni3O10+δ, form a complete solid solution. Powder X-ray and neutron diffraction data show that La4(Co1−xNix)3O10+δ is isostructural to the monoclinic La4Co3O10+δ ...

In the title compound, C9H9IO3, the mol­ecules are close to planar [maximum deviation from benzene ring plane = 0.229 (5) Å for the methyl carboxylate C atom] with the methyl groups oriented away from each other. In the ...

In the title compound, C18H18O6, the biphenyl moiety is twisted with a dihedral angle of 29.11 (10)°. The carbometh­oxy groups form C-C-C-O torsion angles of -18.3 (3) and -27.7 (3)° with the attached rings, as a result ...

Luminescent europium titanium oxides (EuxTiyOz) have been deposited as thin films by atomic layer deposition (ALD) in the temperature range 225 to 375 °C with control of the stoichiometry from pure TiO2 to pure Eu2O3, and ...

Thin films of sodium and potassium oxides have for the first time been deposited using atomic layer deposition. Sodium and potassium complexes of tert-butanol, trimethylsilanol and hexamethyldisilazide have been evaluated ...

The ferroelectric and electro-optical properties of LiNbO3 make it an important material for current and future applications. It has also been suggested as a possible lead-free replacement for present PZT-devices. The ...

Ln2O3 thin films with optically active f-electrons (Ln = Pr, Nd, Sm, Eu, Tb, Dy, Ho, Er, Tm, Yb) have been grown on Si(100) and soda lime glass substrates by atomic layer deposition (ALD) using Ln(thd)3 (Hthd = ...

The electronic structure and optical properties of orthorhombic, monoclinic, and rhombohedral (corundum type) modifications of ZnSiO3, and of rhombohedral, tetragonal, and cubic (spinel type) modifications of Zn2SiO4 have ...

© 1994 Acta Chemica Scandinavica

© 1991 Acta Chemica Scandinavica

© 1991 Acta Chemica Scandinavica

© 1990 Acta Chemica Scandinavica

This research was originally published in Zeitschrift für Kristallographie - New Crystal Structures. © 1988 De Gruyter

© 1988 Acta Chemica Scandinavica

© 1988 Acta Chemica Scandinavica

© 1988 Acta Chemica Scandinavica

© 1987 Acta Chemica Scandinavica