As traditional silicon technology is moving fast towards its fundamental limits, all-oxide electronics is emerging as a challenger offering principally different electronic behavior and switching mechanisms. This technology ...

Alkali metal containing materials have become increasingly attractive in a world hunting for sustainable energy materials and green functional devices. Lithium- and sodium battery technology, lead-free piezo- and ferroelectric ...

Thin films of the catalytically interesting ternary and quaternary perovskites GdCoO3 and Gd0.9Ca0.1CoO3 are fabricated by atomic layer deposition using metal β-diketonates and ozone as precursors. The resulting thin films ...

Amorphous thin films of FePO4 and Fe4(P2O7)3 show excellent power capabilities and good stability as cathode materials in Li-ion batteries. Within our tested range of materials, 10 nm FePO4 shows the best results and can ...

Abstract Luminescent materials enable warm white LEDs, molecular tagging, enhanced optoelectronics and can improve energy harvesting. With the recent development of multi-step processes like down- and upconversion ...

Nanoporous amorphous silicon (a-Si) with <5 nm cylindrical pores have been fabricated by phase separation of aluminum (Al) and silicon, forming self-assembled Al nanowires (NWs), followed by subsequent removal of Al by wet ...

Potassium sodium niobate (KNN) has long been considered a viable candidate for replacing lead‐based materials in piezo‐ and ferroelectric devices. The introduction of KNN on an industrial scale is highly awaited; however, ...

We have investigated how layered structures of TiO2 and Eu2O3 on the subnanometer scale control the optical absorption, energy transfer, emission and quenching mechanisms in sensitized lanthanide luminescence systems. By ...

We have constructed thin films of organic–inorganic hybrid character by combining titanium tetra-isopropoxide (TTIP) and the nucleobases thymine, uracil or adenine using the molecular layer deposition (MLD) approach. Such ...

The authors here report epitaxial growth of the ferrimagnet NixFe3–xO4 (NFO) by atomic layer deposition at low temperatures. Films grow epitaxially at a reactor temperature of 250 °C and require no further postannealing ...

Thin film of silicon is an interesting material for many technological applications in electronic industry and in energy harvesting technologies, but requires a method for controlled growth of thin films. The purpose of ...

nm-Range forces acting between calcite surfaces in water affect macroscopic properties of carbonate rocks and calcite-based granular materials and are significantly influenced by calcite surface recrystallization. We suggest ...

Two distinguishable plasma modes in the O2–N2 radio frequency capacitively coupled plasma (CCP) used in remote plasma-enhanced atomic layer deposition (PEALD) were observed. Optical emission spectroscopy and spectra ...

In the present contribution we assess the luminescent properties of amorphous europium titanium phosphate thin films. The films have been deposited by atomic layer deposition, using the precursor combinations Eu(thd)3 (thd ...

Organic–inorganic hybrid materials are an emerging class of materials suitable for deposition by the molecular layer deposition (MLD) technique. Their toolbox is now expanded to include linkers of amino acids, which when ...

UV to visible and near-infrared converting thin films of YbVO4 have been deposited by atomic layer deposition, using the precursor combinations Yb(thd)3 (thd = 2,2,6,6-tetramethyl-3,5-heptanedione) and O3, and VO(thd)2 and ...

We demonstrate controlled deposition by atomic layer deposition of YVO4:Yb3+ thin films exhibiting an intense NIR emission under UV excitation after post-deposition annealing at 1000 °C. The samples are deposited using the ...

Thin films of complex alkali oxides are frequently investigated due to the large range of electric effects that are found in this class of materials. Their piezo- and ferroelectric properties also place them as sustainable ...

Luminescent europium titanium oxides (EuxTiyOz) have been deposited as thin films by atomic layer deposition (ALD) in the temperature range 225 to 375 °C with control of the stoichiometry from pure TiO2 to pure Eu2O3, and ...

Thin films of sodium and potassium oxides have for the first time been deposited using atomic layer deposition. Sodium and potassium complexes of tert-butanol, trimethylsilanol and hexamethyldisilazide have been evaluated ...

The ferroelectric and electro-optical properties of LiNbO3 make it an important material for current and future applications. It has also been suggested as a possible lead-free replacement for present PZT-devices. The ...

Ln2O3 thin films with optically active f-electrons (Ln = Pr, Nd, Sm, Eu, Tb, Dy, Ho, Er, Tm, Yb) have been grown on Si(100) and soda lime glass substrates by atomic layer deposition (ALD) using Ln(thd)3 (Hthd = ...