Corrosion in carbon steel pipelines is a major threat for safe CO2 transport, and there have been several projects studying the corrosivity of impurities which could be found in captured CO2. Often only two or three of ...

In a solid-liquid dual-phase CO2 separation membrane, the native ions in the molten alkali carbonate, including carbonate anions and metal cations can transport CO2 in a process that is charge-compensated by electronic ...

A solid-state photoelectrochemical (SSPEC) cell is an attractive approach for solar water splitting, especially when it comes to monolithic device design. In a SSPEC cell the electrodes distance is minimized, while the use ...

Mixed oxide hydride anion systems constitute a novel class of materials exhibiting intriguing properties such as solid-state hydride ion conduction and fast anion exchange. In this contribution we derive the kinetics of ...

High-temperature instability of the Ca3Co4−yO9+δ and CaMnO3−δ direct p-n junction causing the formation of Ca3Co2−xMnxO6 has motivated the investigation of the thermoelectric performance of this intermediate phase. Here, ...

In this work, Co-based cocatalysts are electrodeposited on mesoporous Ta3N5 nanotubes. The electrodeposition time is varied and the optimized photoelectrode reaches a photocurrent density of 6.3 mA/cm2 at 1.23 V vs. SHE, ...

The reactivity of BaZr1−xYxO3−δ (x = 0–0.2) ceramics under 1 atm CO2 at 650 °C for up to 1000 h was investigated in order to elucidate possible degradation processes occurring when the material is applied as a proton-conducting ...

Ta3N5 nanotubes (NTs) were obtained from nitridation of Ta2O5 NTs, which were grown directly on Ta foil through a 2-step anodization procedure. With Co(OH)x decoration, a photocurrent density as high as 2.3 mA cm−2 (1.23 ...

A novel synthesis route for preparing well-defined composites based on CMO (CaMnO3) has been established taking advantage of the unique phase relations in the system Ca-Mn-O at reducing- and oxidizing atmosphere, respectively. ...

We apply inline electron holography to investigate the electrostatic potential across an individual BaZr0.9Y0.1O3 grain boundary. With holography, we measure a grain boundary potential of −1.3 V. Electron energy loss ...

Hydrogen production from water electrolysis is a key enabling energy storage technology for the large-scale deployment of intermittent renewable energy sources. Proton ceramic electrolysers (PCEs) can produce dry pressurized ...

Diffusivity on the A- and B-site of polycrystalline perovskite CaMnO3-δ with Ca deficiency and spinel CaMn2O4 (marokite) as a secondary phase was studied using chemical tracers and secondary ion mass spectrometry (SIMS) ...

In order to adopt water electrolyzers as a main hydrogen production system, it is critical to develop inexpensive and earth-abundant catalysts. Currently, both half-reactions in water splitting depend heavily on noble metal ...

We herein report inter-diffusion across the interface between p-type Ni0.98Li0.02O and n-type Zn0.98Al0.02O for various applications including p-n-heterojunction diodes and oxide thermoelectrics. Diffusion couples were ...

The electrical properties of a p–n heterojunction of polycrystalline p-type Ni0.98Li0.02O and n-type Zn0.98Al0.02O have been investigated for potential applications in high-temperature oxide-based thermoelectric generators ...

KBaPO4 – recently reported to hydrate in steam at 80°C into a novel low-temperature protonic conductor – was synthesized by a solid state reaction and its electrical properties characterized by impedance spectroscopy. At ...

The electrochemical performance of Co3O4/CeO2 mixed oxide materials as electrodes, when exposed to H2S/H2O atmospheres, was examined employing a proton conducting symmetrical cell, with BaZr0.7Ce0.2Y0.1O3 (BZCY72) as the ...

Rare earth double perovskites comprise a class of functional oxides with interesting physiochemical properties both for low- and high-temperature applications. However, little can be found relating electrical properties ...

Planar metal-supported cell designs provide cost-effective scaling-up of solid oxide fuel cells and electrolysers. Here, we report on the fabrication of a BaZr0.85Y0.15O3−δ–NiO (BZY15–NiO) composite electrode and ...

© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

The electrical properties and the charge carrier mechanism of porous 8 mol% yttria-stabilized zirconia (8YSZ) ceramic samples have been investigated over wide ranges of relative humidity (RH) and temperature (25-400 ºC). ...

The aim of this work has been the photoelectrochemical (PEC) study of nanostructured photoanodes based on TiO2. Highly ordered and well adhered TiO2 nanotubes (TNTs) of different lengths (∼2–20 μm) were prepared in a ...