Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 ...

High performance magnetocaloric materials are crucial to realize the energy efficient and environment friendly magnetic cooling/refrigeration technology. We have designed Mn1-xCuxCoGe compounds possessing a giant magnetocaloric ...

The properties of the mixed system LiBH4–LiCl–P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 60 °C, accompanied with increased Li+ conductivity ...

As traditional silicon technology is moving fast towards its fundamental limits, all-oxide electronics is emerging as a challenger offering principally different electronic behavior and switching mechanisms. This technology ...

Hydrogen is essential in a variety of large-scale chemical processes. As a carbon-free energy carrier, hydrogen has a potential for wide use within power production and transportation. However, most of the recent production ...

In this work we benefited from recent advances in tools for crystal‐structure analysis that enabled us to describe an exotic nanoscale phenomenon in structural chemistry. The Mn0.60Ni0.40As sample of the Mn1−xNixAs solid ...

The current study extends the insight into solid-state diffusion in alloys of the Platinum Group Metals (PGMs). Thereby, we pave the way for tailor making surface compositions of binary platinum (Pt) – rhodium (Rh) model ...

Nickelates, just like their isoelectronic cousins (the cuprate superconductors), are candidates for high temperature superconductivity. As charge density waves (CDW) and superconductivity might share a similar microscopic ...

Potassium sodium niobate (KNN) has long been considered a viable candidate for replacing lead‐based materials in piezo‐ and ferroelectric devices. The introduction of KNN on an industrial scale is highly awaited; however, ...

The sorbent enhanced water-gas shift (SEWGS) process has great potential for CO2 capture and is thereby a realistic alternative to conventional post-combustion capture by gas emission scrubbing. Nevertheless, better ...

In recent years, the scientific community has shown an increasing interest in regards to the investigation of novel materials for the intercalation of lithium atoms, suitable for application as cathodes in the new generations ...

The authors here report epitaxial growth of the ferrimagnet NixFe3–xO4 (NFO) by atomic layer deposition at low temperatures. Films grow epitaxially at a reactor temperature of 250 °C and require no further postannealing ...

Several studies have demonstrated that MgH2 is a promising conversion-type anode toward Li. A major obstacle is the reversible capacity during cycling. Electrochemical co-existence of a mixed metal hydride-oxide conversion ...

Transition metal containing polyanion compounds are effective excellent electrode materials for sodium-ion batteries due to their high intrinsic electrochemical potentials and to the resulting high energy density. Iron ...

Thin film of silicon is an interesting material for many technological applications in electronic industry and in energy harvesting technologies, but requires a method for controlled growth of thin films. The purpose of ...

In the past few decades, advances in colloidal nanoparticle synthesis have created new possibilities for the preparation of supported model catalysts. However, effective removal of surfactants is a prerequisite to evaluate ...

Pre-combustion CO2 capture technologies are becoming viable alternatives to more conventional post-combustion capture by gas emissions scrubbing. The sorbent enhanced water-gas shift (SEWGS) process is a promising future ...

To improve lithium and sodium ion battery technology, it is imperative to understand how the properties of the different components are controlled by their chemical structures. Operando structural studies give us some of ...

In the present contribution we assess the luminescent properties of amorphous europium titanium phosphate thin films. The films have been deposited by atomic layer deposition, using the precursor combinations Eu(thd)3 (thd ...

We have studied the structural behavior of SAPO-37 during calcination using simultaneous in situ powder X-ray diffraction (PXRD) and mass spectroscopy (MS) in addition to ex situ thermogravimetric analysis (TGA) and ...

UV to visible and near-infrared converting thin films of YbVO4 have been deposited by atomic layer deposition, using the precursor combinations Yb(thd)3 (thd = 2,2,6,6-tetramethyl-3,5-heptanedione) and O3, and VO(thd)2 and ...

Sodium orthosilicates Na2MSiO4 (M = Mn, Fe, Co and Ni) have attracted much attention due to the possibility of exchanging two electrons per formula unit. They are also found to exhibit great structural stability due to a ...

Li2FeSiO4 is an important alternative cathode for next generation Li-ion batteries due to its high theoretical capacity (330 mA h g−1). However, its development has faced significant challenges arising from structural ...

We demonstrate controlled deposition by atomic layer deposition of YVO4:Yb3+ thin films exhibiting an intense NIR emission under UV excitation after post-deposition annealing at 1000 °C. The samples are deposited using the ...

Thin films of complex alkali oxides are frequently investigated due to the large range of electric effects that are found in this class of materials. Their piezo- and ferroelectric properties also place them as sustainable ...

The Ruddlesden–Popper (RP3) type oxides, La4Co3O10+δ and La4Ni3O10+δ, form a complete solid solution. Powder X-ray and neutron diffraction data show that La4(Co1−xNix)3O10+δ is isostructural to the monoclinic La4Co3O10+δ ...

In the title compound, C9H9IO3, the mol­ecules are close to planar [maximum deviation from benzene ring plane = 0.229 (5) Å for the methyl carboxylate C atom] with the methyl groups oriented away from each other. In the ...

In the title compound, C18H18O6, the biphenyl moiety is twisted with a dihedral angle of 29.11 (10)°. The carbometh­oxy groups form C-C-C-O torsion angles of -18.3 (3) and -27.7 (3)° with the attached rings, as a result ...

Luminescent europium titanium oxides (EuxTiyOz) have been deposited as thin films by atomic layer deposition (ALD) in the temperature range 225 to 375 °C with control of the stoichiometry from pure TiO2 to pure Eu2O3, and ...

Thin films of sodium and potassium oxides have for the first time been deposited using atomic layer deposition. Sodium and potassium complexes of tert-butanol, trimethylsilanol and hexamethyldisilazide have been evaluated ...

The ferroelectric and electro-optical properties of LiNbO3 make it an important material for current and future applications. It has also been suggested as a possible lead-free replacement for present PZT-devices. The ...

Ln2O3 thin films with optically active f-electrons (Ln = Pr, Nd, Sm, Eu, Tb, Dy, Ho, Er, Tm, Yb) have been grown on Si(100) and soda lime glass substrates by atomic layer deposition (ALD) using Ln(thd)3 (Hthd = ...